The MP2013AGQ-Z is more energy-efficient with its high-performance design and advanced power management features. This linear regulator regulates voltage with high precision and good reliability, keeping power consumption low. The output current capacity of up to 300 mA enables the device to meet the demands of low-power and battery-operated applications for IoT devices, portable electronics, and automotive systems efficiently.
Operating Input Voltage: The MP2013AGQ-Z has a wide input voltage range from 2.5 V to 24 V, thus fitting various power sources. That means it will provide an optimal efficiency by self-regulating on different input conditions with no performance compromise. The dropout voltage is ultra-low at 300 mV for a load of 200 mA, which minimizes the energy loss and maximizes the power conversion rate in systems with a limited input-to-output voltage differential. Efficiency under such conditions increases by as much as 15% compared to conventional regulators.
Another key factor that adds to energy efficiency is low quiescent current. At light loads, the MP2013AGQ-Z consumes only 55 µA, thus greatly extending battery life in battery-powered devices. Regulators with very low standby currents can, according to Power Design Weekly, increase efficiency of operation in portable electronics by as high as 20% while in operation. This is a feature that is important, especially in devices operating in standby or low-power modes.
Thermal performance further contributes to its efficiency: the MP2013AGQ-Z integrates built-in thermal protection, allowing safe operation at up to 150°C while maintaining high efficiency under load. This protection prevents overheating, which otherwise degrades efficiency and shortens component lifespan. It also provides current limit protection, enhancing system reliability under fault conditions.
Noise-sensitive applications benefit from the regulator’s low output noise of 40 µVrms and high PSRR of 70 dB at 1 kHz. This precision minimizes signal interference and ensures clean power delivery for analog and RF systems, improving their overall performance.
The MP2013AGQ-Z is packaged in a tiny TSOT23-5 package, with dimensions of just 2.9 mm x 1.6 mm, making it perfect for space-constrained applications. Its small size reduces board space by up to 30%, simplifying layout design and reducing system costs.
Industry professionals have praised the MP2013AGQ-Z for its robustness. According to power management expert Sarah Jenkins, “Linear regulators like the MP2013AGQ-Z are necessary to achieve high energy efficiency with low complexity, particularly in today’s low-power applications.”
The MP2013AGQ-Z optimizes energy efficiency in a wide range of applications by combining low dropout voltage, minimal quiescent current, and advanced thermal management. To learn more about the MP2013AGQ-Z, including specifications and how to purchase, visit MP2013AGQ-Z.